What are the steps in selecting a control valve?

Asked by odadmin 6 years, 3 months ago | 1 Answers


1 Answer

0
cobiesmith 5 years, 10 months ago

Control valve selection typically depend upon the following:

  • Process fluid characteristics
  • Process conditions
    • Flow rate
    • Temperature
    • Pressure
  • Differential pressure
  • Valve style
  • Controls
  • Desired flow characteristics
  • Desired pressure drop
  • Turn-down ratio

Related Posts


Valve Leak-By Test Procedures
Valve Leak-By Test Procedures

OverviewThis testing guidance is designed to aid in developing test procedures for a specific project by describing the steps involved …

Automatic Isolation Valves Test Procedures
Automatic Isolation Valves Test Procedures

The methods described below apply to valves designed to isolate equipment, such as chillers, boilers, and cooling towers, from the …

Application and Limitation of using gate, globe, and check valves
Application and Limitation of using gate, globe, and check valves

Single or double valves at a classification change should be suitable for the more severe line classification on either side …

Control Valve Failure Scenarios
Control Valve Failure Scenarios

This article discusses some of the scenarios for an upstream control valve failure that may arise from the failure or …

Control Valve Leakage Test Requirement in Natural Gas and Monoethylene Glycol (MEG) Environment
Control Valve Leakage Test Requirement in Natural Gas and Monoethylene Glycol (MEG) Environment

Due to the possible presence of toxic gas in an operating facility, and in order to avoid environmental implications, the …

Control valve maintenance and things to do to extend control valves life
Control valve maintenance and things to do to extend control valves life

Always follow the control valve manufacturer’s maintenance manuals. Typical maintenance topics are summarized here together with recommendation to extend the …