Typical control lines compressor antisurge control response

Asked by RichS29 5 years, 11 months ago | 1 Answers


1 Answer

0
odadmin 5 years, 9 months ago

Safety On Line

Safety on line is a control line representing the distance from the surge limit line at which the safety on response will assume a surge has occurred and increase the surge control margin.

Surge Limit Line

Surge limit line is a line on compressor map representing the minimum flow below which the compressor will surge.

Recycle Trip Line

Recycle trip line defines an operating point beyond which recycle trip response will ratchet the control valve open.

Surge Control Line

Surge control line (SCL) defines the minimum distance between the operating point and surge limit line. As shown in figure SCL is always to the right to the SLL.

Tight Shut-Off Line

Tight shut-off line is a control line representing the minimum deviation for the tight shut-off response.

Surge control margine

The surge control margin (SCM) is the distance between SCL and SLL.

Related Posts


Principles of Impeller Sizing
Principles of Impeller Sizing

The definition of centrifugal (a word, by the way, coined by Newton) is moving, or tending to move, away from …

Effects of Varying Temperature or Molecular Weight
Effects of Varying Temperature or Molecular Weight

As people always say, things change. And nowhere is this more true than in temperature rate and molecular weight.As per …