What does MPY stand for?

Can any one suggest what is the unit MPY stands for?

Please give method if possible for monitoring the rate of corrosion and the extent of metal loss for any particular metal equipment.

What is the difference between Maximum Allowable Working Pressure [MAWP] & Maximum Operating Pressure [MOP].

Do non-pressure / non-hydrocarbon containing parts (316L SS) on Gas Turbines need to be painted? There would be no significant consequences if chloride stress corrosion cracking occurs.

The Classification Society defines the corrosion and wear allowance for the mooring line chain as 0.2mm to 0.4mm per year. If I have a company corrosion requirement as a corrosion rate of 0.4mm/year (for a total of 10mm in 25 years) in addition to the an...

What is the difference between the maximum allowable working Pressure or (MAWP) and Design Pressure? Are they same?

FPSOs with steel pipework are frequently suffering blocked nozzles due to corrosion. I would like to investigate alternative piping mateials to full deluge testing as this contributes to corrosion of topsides pipework and damages electrical equipment.

Knowledge sharing on offshore and subsea corrosion and integrity management based on past experience and lessons learned.

What are the recommended repair procedures (if any) for a crude oil desalter that involved/showed Chloride Stress Corrosion Cracking?

What are the conditions for sulfide stress cracking and if the conditions are present how long does it take to occur?

Equipment including nuts and bolts in the H2S environments (i.e. Sour Service, Fuel Gas System) shall consider the followings: - Using Super Duplex material - Using 3rd party verification of metallurgy and mechanical properties - PMI (Positive Mat...

What are the conditions for sulfide stress cracking corrosion?