Process Start-up?

Asked by ChemKB 5 years, 1 month ago | 1 Answers

What is Process Start-up?


1 Answer

1
jcargill 5 years, 1 month ago
Start-Up is the responsibility of the Operations Group and the activities are defined in a dedicated project Start-up Manual. The Project Completions Group will have a team of personnel available to assist and advise the Operations Group. Following Start-Up a number of Systems will be commissioned with product and live loads in the systems. These Systems will be commissioned by the Project Completions Team under the control of the Completions Manager and in direct coordination with the Installation Manager.

Related Posts


Piping and Vessels Preparation for Commissioning - Part 1
Piping and Vessels Preparation for Commissioning - Part 1

1. IntroductionBefore undertaking introducing the feed into a facility, a number of specific process operations must be carried out on …

Piping and Vessels Preparation for Commissioning - Part 3
Piping and Vessels Preparation for Commissioning - Part 3

Part 2 - Leak Test 3. Dry-out3.1 GeneralAt the end of construction, and following commissioning tasks such as water flushing, …

Piping and Vessels Preparation for Commissioning - Part 5
Piping and Vessels Preparation for Commissioning - Part 5

Continue of Part 4 - Chemicals Loading of Vessels5. Inert gas purging 5.1 GeneralInert gas purging is most frequently required …

Subsea Commissioning Philosophy
Subsea Commissioning Philosophy

This document is to detail pre-commissioning, commissioning, start-up and performance testing requirements for the subsea system.Drilling and Completion activities related …