MCC spares (starters) installation in existing modules

Asked by keler01 5 years, 6 months ago | 1 Answers

I am looking to add on additional loads to an existing platform MCC’s spares, but the available spaces are almost full. What options do I have? Thanks.


1 Answer

0
franchaze 5 years, 6 months ago

Of course you do not want to overuse the small remaining MCC's spares. Plus the available spaces may not be enought for your new additions anyway. You may want to consider:

  1. Just few installed spares (available in the current Module’s MCCs) are used
  2. Install some additional starters and feeder breakers in the available (empty) spaces
  3. Install some additional new vertical sections (line-ups) 

Related Posts


Consideration in selecting fused switches in a MCC
Consideration in selecting fused switches in a MCC

This article provides recommendations on fused switches in a MCC for short circuit protection of motor and feeder branch circuits.The …

Voltage Testing "Test Before Touch"
Voltage Testing "Test Before Touch"

All circuits are considered energized until testing with a meter proves the circuit is de-energized and safe. This guideline defines …