Is safety valves design pressure same as MAWP?

Asked by Habib Ramini 2 years, 2 months ago | 1 Answers


1 Answer

0
odadmin 2 years, 2 months ago

Typically, the design pressure is same as Maximum allowable working pressure (MAWP). Therefore, PSVs are set at design pressure or the MAWP.

See additional pressure descriptions for comparison.

Related Posts


Valve Leak-By Test Procedures
Valve Leak-By Test Procedures

OverviewThis testing guidance is designed to aid in developing test procedures for a specific project by describing the steps involved …

Automatic Isolation Valves Test Procedures
Automatic Isolation Valves Test Procedures

The methods described below apply to valves designed to isolate equipment, such as chillers, boilers, and cooling towers, from the …

Application and Limitation of using gate, globe, and check valves
Application and Limitation of using gate, globe, and check valves

Single or double valves at a classification change should be suitable for the more severe line classification on either side …

Definitions of MAWP, MAP, MOP, Design Pressure, Hydrotest Pressure, Burst Pressure, Working Pressure and more
Definitions of MAWP, MAP, MOP, Design Pressure, Hydrotest Pressure, Burst Pressure, Working Pressure and more

Maximum Allowable Working Pressure (MAWP) - maximum gauge pressure permissible at the top of the equipment in its operating position …