What is the recommended coating system for 316/316L in offshore environment with design temperature 160F or above?
Also, would the recommended coating system be suitable for Chloride Induced Stress Corrosion Cracking?
Confirm to permanently remove your answer!
Recommend to use two component system: Epoxy Mastic – Surface Tolerant Primer (May contain Aluminum Pigment), and Aliphatic Polyurethane topcoat.
All surface cleaning, preparation, application, inspection and documentation to be performed to SSPC-SP 5 (NACE No. 1), NACE SP0178, or SSPC-SP COM.
Hand or power tool cleaning shall be per SSPC-SP 2, SSPC-SP 3, and SSPC-SP 11.
1.0 ScopeThis specification defines the minimum requirements for the surface preparation, application and inspection of thermal sprayed aluminum (TSA) coatings …