Acid gas treating process selection basis

Asked by aodai 6 years, 11 months ago | 1 Answers


1 Answer

0
ChemKB 6 years, 11 months ago

Acid gas treating selection basis:

  • Type of acid contaminants present in the gas stream
  • Concentrations of each contaminant and degree of removal required
  • Gas volume, temperature, and pressure
  • The desirability of selectively removing one or more of the contaminants without removing the others
  • The feasibility of recovering sulfur
  • The presence and amount of heavy hydrocarbons and aromatics in the gas
  • The environmental conditions required at the plant site

Related Posts


What is the Rich/Lean Amine Loading and what is the appropriate value for them?
What is the Rich/Lean Amine Loading and what is the appropriate value for them?

Amine loading is calculated as the mole ratio of acid gas to the solvent. Rich amine loading (RAL) is referred …

What is Rich/Lean Amine Loading means and what should be there typical values?
What is Rich/Lean Amine Loading means and what should be there typical values?

Rich/Lean Amine Loading (RAL/LAL) refers to the amount of acid gases (CO2, H2S etc,) dissolved in a given amount of …